Remove/install rear engine mount · ar2210t1160b · Mercedes-Benz WIS

AR22.10-T-1160B

Remove/install rear engine mount

11.11.11

ENGINES 402.970, 446.938 in MODEL 613.455 /485

T22.10-0027-01

Viewed from the top:

1 Engine mount

2 Central screw/bolt, engine mount

3 Vibration damper

View from below

T22.10-0008-01

 	Remove/install
1	Open engine compartment flaps
2	Support engine and transmission	 Shim and secure using a suitable transmission jack or inspection pit lift.
		Engine support device, engine hoist gotis://A_01_09.0
3	Remove upper mounting bolt on vibration damper (3)		*BA22.10-N-1012-01E
4	Unscrew screw/bolts (arrows) on longitudinal member		*BA22.10-N-1008-01E
5	Remove center bolt (2) on engine mount (1)		*BA22.10-N-1011-01E
6	Lift engine a little	 Until the engine mount is totally relieved.
7	Remove lower mounting bolts of the engine mount (1)		*BA22.10-N-1001-01E
8	Remove engine mount (1)
9	Remove stop bow from engine mount (1)	 Installation: Set clearance for stop bow: 
		Align engine mount	AP22.10-T-2260B
10	Install in the reverse order

 Engine mounts, engine supports

Number	Designation			Engine 402.970/ 446.938 in model 613.455/ 485	Engine 441.980 in model 613.355	Engine 441.980 in model 613.364/ 365


BA22.10-N-1001-01E	Screw/bolt, engine mount supporting bracket to side member	M12x1.5	Nm	70	70	70
BA22.10-N-1008-01E	Screw/bolt, engine support to substructure	M12x1.5	Nm	65	65	65
		M14x1.5	Nm	130	130	130
BA22.10-N-1011-01E	Central screw/bolt, front engine mount		Nm	160	160	160
BA22.10-N-1012-01E	Screw/bolt, shock absorber to rear shock absorber support		Nm	65	65	65