P22.10-2144-06
Shown on model 171.456
1 Transmission
2 Rear engine mount
3 Engine crossmember
4 Bolts
5 Bolts
6 Ground cable
| Remove/install | ||
| Notes on self-locking nuts and bolts | ||
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Raise vehicle | ||
2 | Detach lower engine compartment paneling | ||
3 | Support transmission (1) with transmission lifter and transmission platform and lift | Only raise transmission (1) slightly until the rear engine mount (2) is relieved. | |
4 | Remove bolts (4) and detach rear engine mount (2) from engine crossmember (3) | Engine 113 | |
Engine 272 | |||
5 | Remove bolts (5) and detach rear engine mount (2) from transmission (1) | Engine 113 | |
Engine 272 | |||
6 | Take out rear engine mount (2) | Installation: Note installation position of rear engine mount (2) and pay attention to correct assembly of the ground line (6). | |
7 | Install in the reverse order |
Engine suspension, engine mounts, engine supports
Number | Designation | Engine 113.989 | ||
BA22.10-P-1004-01S | Bolt, rear engine mount to transmission | Nm | 50 | |
BA22.10-P-1005-01S | Bolt, rear engine mount to rear engine crossmember | Nm | 28 | |
Engine suspension, engine mounts, engine supports
Odkazované dokumenty
- ah0000n000101a Upozornění k samopojistným šroubům a maticím
- ar0060p1000v
- ar6120p1105v
- as0000z001001a Nebezpečí ohrožení života v případě sesunutí nebo překlopení vozu z dílenského zvedáku