ar2020t745002a
Remove/install coolant pipe between coolant pump and oil-water heat exchanger
Typ ar · téma 20.20 · verze 0102 · 2005-07-12
Platí pro: ENGINE 447, 489
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 1 Motor › 20 Chlazení motoru › 20.20 Chladič, hadice chlazení — Řada 447
EinPAS 15 Motor › 15.25 Chladicí systém motoru › 15.25.13 Potrubí/hadice/ventil — Řada 447
Platí také pro motory/převodovky: 489 ***
AR20.20-T-7450-02A
| Remove/install coolant pipe between coolant pump and oil-water heat exchanger
|
|
|
Coolant pump, coolant thermostat
Number
| Designation
| Engine 447, 489
|
|
|
|
|
|
|
|
|
|
|
BA20.10-N-1006-01H
| Bolt of coolant pipe to coolant pump
| Nm
| 25
|
1 Unscrew bolts (1) of coolant pipe (2) at coolant pump
Installation: Pay attention to tightening torque.
2 Detach securing clamps (3) of bracket of coolant pipe to engine block.
3 Detach hose branch (4) at coolant pipe (2).
4 Detach hose (5) at oil-water heat exchanger (6).
5 Take off coolant pipe (2).
6 Install in the reverse order.
