G20.20-3206-01
Shown on model 405.201 with code (C47) Radiator grill at the rear
1 Radiator grill
2 Additional radiator
G20.20-3207-12
Shown on model 405.201
2 Additional radiator
3 Drain screw
4 Coolant hose
5 Coolant hose
6 Screw/bolt
7 Nut
8 Drag bearing
| Remove/install | ||
1 | Raise and secure dumper flatbed | See the Operator's Manual . | |
2 | Remove radiator grille on the side on the left | ||
3 | Remove radiator grill (1) from additional radiator (2) | With code (C47) Radiator grill at the rear | |
Installation: Install new nuts. | |||
| Notes on self-locking nuts and bolts | ||
4 | Drain off and catch coolant at the drain screw (3) | Installation: Pour in coolant. | |
5 | Remove both coolant hoses (4, 5) from additional radiator (2) | ||
6 | Remove both screw/bolts (6) | ||
7 | Unscrew nut (7); remove windshield and bolts | Installation: Install new nut (7). | |
| Notes on self-locking nuts and bolts | ||
8 | Remove additional radiator (2) | Installation: If the additional radiator (2) is replaced the swivel bearing (8) must be changed. | |
9 | Install in the reverse order | ||
10 | Purge engine cooling system |
Odkazované dokumenty
- ah0000n000101a Upozornění k samopojistným šroubům a maticím
- ap2000g2080b Výměna chladicí kapaliny
- ar2000g1040b