ar2010p2460l

Remove/install coolant thermostat

Typ ar · téma 20.10 · verze 0106 · 2009-11-26

Platí pro: ENGINE 137 in MODEL 215, 220

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 20 Chlazení motoru › 20.10 Čerpadlo chladicí kapaliny, termostat chlazení — Řada 215 · Řada 220

EinPAS 15 Motor › 15.25 Chladicí systém motoru › 15.25.30 Čerpadlo/termostat/předehřívací zařízení — Řada 215 · Řada 220

Platí také pro motory/převodovky: 137 ***

AR20.10-P-2460L

Remove/install coolant thermostat

9.11.09

ENGINE 137 in MODEL 215, 220

Remove/install coolant thermostat

P20.10-2017-06

1 Thermostat housing

2 Thermostat

3 Sealing ring

4 Coolant connection

5 Connection

Remove/install

Danger!

Risk of injury to skin and eyes caused by scalding from contact with hot coolant spray. Risk of poisoning caused by swallowing coolant.

Do not open cooling system unless coolant temperature is below 90°C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.

Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

1

Drain coolant at radiator

AR20.00-P-1142HA

2

Remove coolant connection (4)

3

Detach coolant hose to expansion reservoir at connector (5)

Inspect condition of coolant hose and hose clamp, replace if necessary.

4

Remove thermostat housing (1) with thermostat (2)

Installation:

Replace compression ring (3).

*BA20.10-P-1003-01C

5

Remove thermostat (2) from thermostat housing (1)

6

Install in the reverse order

7

Inspect cooling system for leaks

AR20.00-P-1010HA

Coolant pump, coolant thermostat

Number

Designation

Engine
137, 275

BA20.10-P-1003-01C

Bolt for coolant thermostat housing

M6

Nm

15

Odkazované dokumenty