1 | Coolant temperature regulator (thermostatic valve) |
1/1 | Primary valve |
1/2 | Short circuit valve |
W20.10-0005-04
Tests | |||
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
1 | Remove the coolant temperature regulator (1) |
| |
Engine 924.9, | |||
Engine 926.9 | |||
Engine 904.9, 906.9 | |||
2 | At the time, hang the coolant temperature regulator (1) by a wire in a container with water | ||
3 | Heat the water in the container using a hot plate | ||
4 | Measure the water temperature note when the coolant temperature regulator (1) starts opening | Use a temperature measuring device. | |
.Nominal temperature | |||
5 | Continue heating the water until the short-circuit valve (1/2) is closed | Use a temperature measuring device. The short-circuit valve (1/2) must be fully closed. | |
.Short circuit valve | |||
6 | Continue heating the water until the primary valve (1/1) is fully opened, measure travel distance | Use a temperature measuring device. The primary valve (1/1) must be fully open, from 6 to 8 minutes. If the test values are not achieved, replace the coolant temperature regulator (1). | |
.Main valve | |||
7 | Install the coolant temperature regulator (1) | Remove/install coolant thermostat | |
Engine 924.9, | |||
Engine 926.9 | |||
Engine 904.9, 906.9 |
Odkazované dokumenty
- ar2010b2460ta
- ar2010b2460tc
- ar2010b2460tj
- ar2010b2460tja
- as0000z000201a Nebezpečí poranění kůže nebo očí při zacházení s horkými nebo žhavými předměty