ar1840y411301a
Checking oil dipstick
Typ ar · téma 18.40 · verze 0101 · 2019-10-21
Platí pro: Engine 400.925/926/927/928 in model 831.001/002/005
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 1 Motor › 18 Mazání motoru, chlazení motorového oleje › 18.40 Snímač hladiny oleje, snímač tlaku oleje — Řada 400 (modely 925, 926, 927, 928) · Řada 831 (modely 001, 002, 005)
EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.43 Olejová vana/plnicí hrdlo — Řada 400 (modely 925, 926, 927, 928) · Řada 831 (modely 001, 002, 005)
AR18.40-Y-4113-01A
| Checking oil dipstick
|
|
|
|
|
| Drain engine oil at drain plug
| AR18.00-Y-3035-04B
|
Engine
| 400.925/926/927/928 in model 831.001/002/005
|
Number
| Designation
|
| Engine 400.925/926/927/928 in model 831.001/002/005
|
BF18.00-Y-1001-01B
| Engine oil (Filling quantity)
| Litre
| 11
|
|
| Sheet
| BB00.40-P-0228-01A
|
Engine oil checking procedure
|
A
| Oil dipstick
|
B
| Minimum level
|
C
| Maximum level
|
1
| Park the vehicle on a ground level surface.
|
2
| Verify the transmission is still in neutral position.
|
3
| Engine starts and allow it to idle for 30 seconds.
|
4
| Stop the engine and inspect for leaks.
|
|
| Wait at least 15 seconds before removing the oil dipstick.
|
5
| Remove the oil dipstick from the oil dipstick tube and wipe it dry with a clean cloth.
|
6
| Re-install the oil dipstick to the oil dipstick tube completely seated.
|
7
| Remove the oil dipstick and check the oil level.
|
|
| If the oil level is lower than 'Maximum' (C) mark,
|
|
| add recommended oil as necessary to bring the level near the 'Maximum' (C) mark on the dipstick.
|
8
| Maintain oil level between Minimum (B) and Maximum (C) range, do not overfill.
|
9
| Re-install the oil dipstick to the oil dipstick tube completely seated.
|
