AR15.30-P-7100TX | Remove, install starter | 12.4.06 |
ENGINE 273 in MODEL 219
ENGINE 273 (except 273.962) in MODEL 211
P15.30-2144-06
1 Protective cap
1a Cable holder
2 Electrical connection circuit 30
3 Electrical connection circuit 50
4 Bolts
M1 Starter
| Remove, install | ||
| Notes on self-locking nuts and bolts | ||
1 | Disconnect ground line from battery | Insulate ground line clamp as a protection against unintentional contact of dismounted ground line with ground point of battery. | |
Model 211.0 | |||
Model 211.2 | |||
Model 219 | |||
2 | Dismount cable holder (1a) from starter (M1) | ||
3 | Dismount electrical connection terminal 50 (3) at starter (M1) | | |
4 | Unscrew bolts (4) of starter (M1) and pull the starter (M1) to the front | | |
5 | Pull out protective cap (1) and dismantle electrical connection circuit 30 (2) at starter (M1) | | |
6 | Remove the starter (M1) from the front at the bottom between the steering and the front axle carrier | ||
7 | Check the starter ring gear on the drive plate for wear and damage | Rotate engine at the center bolt, the crankshaft in the direction of rotation. | |
8 | Install in the reverse order |
Starter
Odkazované dokumenty
- ah0000n000101a Upozornění k samopojistným šroubům a maticím
- ar5410p0003t Odpojení, připojení ukostřovacího kabelu akumulátoru
- ar5410p0003t
- ar5410p0003ta Odpojení, připojení ukostřovacího kabelu akumulátoru
- ar5410p0003ta
- ar5410p0003tx Odpojení, připojení ukostřovacího kabelu akumulátoru