ar1530b7200a

Check starter for proper operation

Typ ar · téma 15.30 · verze 0301 · 2019-11-22

Platí pro: Engine 457.9 Engine 460.984 in model 934 Engine 904.9, 906.9 Engine 924.9, 926.9

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 15 Elektrické zařízení motoru › 15.30 Startér — Řada 460 (modely 984) · Řada 904 (modely 9**) · Řada 906 (modely 9**) · Řada 934

EinPAS 15 Motor › 15.35 Startér › 15.35.20 Startér — Řada 460 (modely 984) · Řada 904 (modely 9**) · Řada 906 (modely 9**) · Řada 934

Platí také pro motory/převodovky: 457 9**, 924 9**, 926 9**

AR15.30-B-7200A

Check starter for proper operation

07.11.2019

Engine	457.9
Engine	460.984 in model 934
Engine	904.9, 906.9
Engine	924.9, 926.9

Check starter for proper operation

Delco Remy starter

1	Battery
2	Charge test
3	RPM indicator
4	Starting motor
5	Ammeter
6	Switch
7	Voltmeter
BAT	Battery Terminal
S	Switch terminal
M	Motor terminal

B15.30-1010-05

	Check
1	No-load starter motor test	 Do not run the starter continuously for more than 30 seconds in order to avoid overheating damage. Wait at least 2 minutes to actuate it again
		 The no-load starter motor test comprises the analysis of the values acquired during the test and compares it with he nominal values
		.Operating current	*BE15.30-B-1001-01A
		.Starter revolutions	*BE15.30-B-1002-01A
		.Solenoid resistance	*BE15.30-B-1003-01A
2	Secure the starter in a vise	 Cover the vise jaws with pliable material.
3	Carry out the connections indicted in the figure above	 In the case of sparks or current flow during the connections, disconnect the battery lead and refer to the troubleshooting table.
		 The battery negative lead has to be the last to be connected.
4	Adjust the load test (2) to obtain the 24 Volts reading and actuate the switch (6) observing the maximum specified time of 30 s	 If the starter motor presents discrepancies between the nominal and measured values, refer to the troubleshooting table.
		 In the case of high current and operation failure (zero RPM), stop the test immediately.

Starter

Number	Designation			Engine 904.9, 906.9, 924.9, 926.9 with starter 28 MT (24 Volts)	Engine 904.9, 906.9, 924.9, 926.9 with starter 28 MT (12 Volts)
BE15.30-B-1001-01A	Operating current	minimum	Amperes	75	115
		maximum	Amperes	100	190

Starter

Number	Designation			Engine 904.9, 906.9, 924.9, 926.9, 457.9, 460.9 with starter 37 MT	Engine 904.9, 906.9, 924.9, 926.9, 457.9, 460.9 with starterr 41 MT
BE15.30-B-1001-01A	Operating current	minimum	Amperes	68	65
		maximum	Amperes	100	100

Starter

Number	Designation			Engine 904.9, 906.9, 924.9, 926.9 with starter 28 MT (24 Volts)	Engine 904.9, 906.9, 924.9, 926.9 with starter 28 MT (12 Volts)
BE15.30-B-1002-01A	Starter revolutions	minimum	1/min.	3600	2800
		Maximum	1/min.	6000	5000

Starter

Number	Designation			Engine 904.9, 906.9, 924.9, 926.9, 457.9, 460.9 with starter 37 MT	Engine 904.9, 906.9, 924.9, 926.9, 457.9, 460.9 with starterr 41 MT
BE15.30-B-1002-01A	Starter revolutions	minimum	1/min.	3225	6200
		Maximum	1/min.	4050	8700

Starter

Number	Designation			Engine 904.9, 906.9, 924.9, 926.9 with starter 28 MT (24 Volts)	Engine 904.9, 906.9, 924.9, 926.9 with starter 28 MT (12 Volts)
BE15.30-B-1003-01A	Solenoid resistance	Pull-in coil	Ohm	0,16...0,20	0,17...0,18

Starter

Number	Designation			Engine 904.9, 906.9, 924.9, 926.9, 457.9, 460.9 with starter 37 MT	Engine 904.9, 906.9, 924.9, 926.9, 457.9, 460.9 with starterr 41 MT
BE15.30-B-1003-01A	Solenoid resistance	Pull-in coil	Ohm	0,638...0,702	0,430...0,490