ar1518p011502b

Removing contacts from socket

Typ ar · téma 15.18 · verze 0100 · 1999-10-05

Platí pro: ENGINE 668.941 in MODEL 168.007 Kupplung an Glühendstufe (N14/2) ENGINE 668.940 in MODEL 168.008 Kupplung an Glühendstufe (N14/2)'

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 15 Elektrické zařízení motoru › 15.18 Kabelové svazky — Řada 168 (modely 007, 008) · Řada 668 (modely 940, 941)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.25 Hlavní kabelový svazek › 25.25.20 Kabelový svazek motoru — Řada 168 (modely 007, 008) · Řada 668 (modely 940, 941)

AR15.18-P-0115-02B

Removing contacts from socket

Removing contacts from socket

Release tool for SPT/JPT contacts

210 589 02 33 00

Removing contacts from socket

P54.18-2599-01

A Secondary-releasing socket

1 Use a suitable tool to press slide out of its end detent position in direction of arrow.

Do not damage seal at slide.

Removing contacts from socket

P54.18-2530-06

B Removing contacts from socket (SPT)

1 Insert release tool from the front through the openings at the contact receptacle of the socket.

The spring plates (2) of the contact socket are pressed together when this is done.

2 Remove the contacts from the socket (1) by pulling slightly on the relevant cable.

Installation

Check that the contact socket is properly locked in place in the housing by pulling slightly on the cable.

Illustration shows 4-pin SPT socket