Engine 272 |
1 | Bolts |
T1/1 | Cylinder 1 ignition coil |
T1/2 | Cylinder 2 ignition coil |
T1/3 | Cylinder 3 ignition coil |
T1/4 | Cylinder 4 ignition coil |
T1/5 | Cylinder 5 ignition coil |
T1/6 | Cylinder 6 ignition coil |
P15.10-2149-06
Engine 273 |
1 | Bolts |
T1/1 | Cylinder 1 ignition coil |
T1/2 | Cylinder 2 ignition coil |
T1/3 | Cylinder 3 ignition coil |
T1/4 | Cylinder 4 ignition coil |
T1/5 | Cylinder 5 ignition coil |
T1/6 | Cylinder 6 ignition coil |
T1/7 | Cylinder 7 ignition coil |
T1/8 | Cylinder 8 ignition coil |
P15.10-2190-04
| Remove/install | ||
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage to ignition system | ||
1 | Switch ignition off, remove ignition key (transmitter key) | For vehicles with Keyless-Go code 889: Press Keyless-Go start/stop button repeatedly until the ignition is switched off. | |
2 | Remove air filter housing | ||
3 | Remove screws (1) of the ignition coils for cylinder 1 to cylinder 6 or 8 (T1/1 to T1/6 or T1/8) | Screw/bolt, ignition coil to cylinder head cover | |
4 | Disconnect electrical connectors from the ignition coils for cylinder 1 to cylinder 6 or 8 (T1/1 to T1/6 or T1/8) | ||
5 | Detach ignition coils for cylinder 1 to cylinder 6 or 8 (T1/1 to T1/6 or T1/8) upward | ||
6 | Detach ignition coil connector | ||
7 | Detach spark plug connector |
| |
| Check | ||
8 | Check spark plug connector, ignition coil connector, and ignition line | Check for damage, deformation and crack formation, replace if necessary. | |
9 | Install in the reverse order | ||
10 | Check that the ignition line is routed correctly |
| |
11 | Read out fault memory | ||
| Connect STAR DIAGNOSIS and read out fault memory | ||
Commercially available devices/tools |
Odkazované dokumenty
- ad0000p200004a
- ad0000p200004a Připojení STAR DIAGNOSIS, načtení chybové paměti
- ah1510p000201v Upozornění k zamezení poškozením zapalovacího systému
- ah5400p000101a Upozornění k zamezení poškozením elektronických součástí elektrostatickým výbojem
- ar0910p1150ts Demontáž, montáž pláště vzduchového filtru
- ar1512p101001tx
- as0000z003501a Nebezpečí ohrožení života při pracích na součástech a systémech se střídavým napětím U >= 30 V (AC), resp. se stejnosměrným napětím U >= 60 V (DC)