ar1440w2008r

Remove/install pressure reservoir at pump module of exhaust aftertreatment system

Typ ar · téma 14.40 · verze 0200 · 2011-04-06

Platí pro: ENGINES 926.9 in MODEL 949 with CODE (MS5) BlueTec 5

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 14 Sběrné výfukové potrubí, motorová brzda, zařízení pro snížení obsahu škodlivin ve výfukových plynech › 14.40 Dodatečná úprava spalin, AdBlue — Řada 949

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.51 Čerpadlo/dávkovací jednotka/tryska — Řada 949

Platí také pro motory/převodovky: 926 9**

AR14.40-W-2008R

Remove/install pressure reservoir at pump module of exhaust aftertreatment system

25.3.11

ENGINES 926.9 in MODEL 949 with CODE (MS5) BlueTec 5

Remove/install pressure reservoir at pump module of exhaust aftertreatment system

W14.40-1471-08

1 Pump module

2 Set of hoses

3 Pressure reservoir housing

6 Valve

7 Housing cover

4 Pressure reservoir

5 O-ring

Modification notes

24.3.11

Pressure reservoir for pump module altered, added.

Step 1

BT14.40-W-0003-01A

Charge pressure reservoir (4) with compressed air, added.

Operation step 6

AR14.40-W-2051A

Removing

Danger!

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Only pour AdBlue into suitable containers. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

1

Detach protective cap on valve (6)

If there is still a valve cap and protective cap on pressure reservoir (4) in the previous version a valve cap in a new version must be installed. The new valve cap possesses an inner seal and is installed without a protective cap.

pressure reservoir for pump module altered

BT14.40-W-0003-01A

2

Drain pressure reservoir (4)

Press valve (6) until pressure reservoir (4) has been completely drained.

3

Remove housing cover (7) with pressure reservoir (4)

Install

4

Clean housing cover (7) with pressure reservoir (4) and pressure reservoir housing (3) and inspect for damage

Replace housing cover (7) with pressure reservoir (4) if necessary.

5

Install housing cover (7) with pressure reservoir (4)

Clean contact surfaces for O ring (5) using clean rags and water.

Coat O-ring (5) before assembly thinly with lubricant.

*BR00.45-Z-1019-06A

Always use the specified lubricant and make sure that it is applied extremely sparingly since otherwise it may damage the exhaust aftertreatment system.

*BA14.40-N-1011-02C

6

Inflate pressure reservoir (4) with compressed air

AR14.40-W-2051A

7

Check housing cover (7) for signs of leaks

Visual inspection.

Exhaust aftertreatment

Number

Designation

Engine
900.9, 902.9, 924.9, 925.9, 926.9 with code MS4 or code MS5

BA14.40-N-1011-02C

Pressure reservoir housing cover on pump module

Nm

4

Repair materials

Number

Designation

Order number

BR00.45-Z-1019-06A

ABS sensor grease

A 000 989 62 51 10

Odkazované dokumenty