ar1440b2056a

Remove/install filter in inlet of AdBlue metering device

Typ ar · téma 14.40 · verze 0103 · 2019-07-24

Platí pro: Engine 457.9 in model 634.0 with code MS5 (Euro V) with Liquid Only Engine 457.9 in model 695.023/053 with code MS5 (Euro V) with Liquid Only Engine 924.9 in model 979.0 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2 with code MS5 (Euro V) with Liquid Only Engine 924.9, 926.9 in model 958.1 with code MS5 (BlueTec 5) with Liquid Only

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 14 Sběrné výfukové potrubí, motorová brzda, zařízení pro snížení obsahu škodlivin ve výfukových plynech › 14.40 Dodatečná úprava spalin, AdBlue — Řada 368 (modely 002, 004, 006, 100, 104, 106, 115, 117) · Řada 382 (modely 1**) · Řada 384 (modely 0**, 223) · Řada 634 (modely 0**) · Řada 685 (modely 282, 284, 289, 290, 295) · Řada 695 (modely 023, 053) · Řada 958 (modely 1**) · Řada 979 (modely 0**, 2**)

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.51 Čerpadlo/dávkovací jednotka/tryska — Řada 368 (modely 002, 004, 006, 100, 104, 106, 115, 117) · Řada 382 (modely 1**) · Řada 384 (modely 0**, 223) · Řada 634 (modely 0**) · Řada 685 (modely 282, 284, 289, 290, 295) · Řada 695 (modely 023, 053) · Řada 958 (modely 1**) · Řada 979 (modely 0**, 2**)

Platí také pro motory/převodovky: 457 9**, 924 9**, 926 9**

AR14.40-B-2056A

Remove/install filter in inlet of AdBlue metering device

23.07.2019

Engine

457.9 in model 634.0

with code MS5 (Euro V)

with Liquid Only

Engine

457.9 in model 695.023/053

with code MS5 (Euro V)

with Liquid Only

Engine

924.9 in model 979.0

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 368.002/004/006/100/104/106/115/117, 382.1, 384.0/223, 685.282/284/289/290/295, 979.2

with code MS5 (Euro V)

with Liquid Only

Engine

924.9, 926.9 in model 958.1

with code MS5 (BlueTec 5)

with Liquid Only

Remove/install filter in inlet of AdBlue metering device

W14.40-1635-09

1

Metering unit

4

Connecting pieces

6

Coupling nozzle

2

Urea inlet

5

Bolts

7

Holes

3

Filter

Remove

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Remove the metering unit (1)

Notes on use, material properties and handling of AdBlue®

AH14.40-B-0001-01A

.

AR14.40-B-3020A

2

Remove the coupling nozzle (6) in the dosing unit (1)

3

Lift out the filter (3)

A thin nosed pliers may be used as tool.

4

Remove the connecting pieces (4)

Do not re-utilize the connecting pieces (4)

5

Remove the bolts (5)

Do not re-utilize the bolts (5).

6

Clean the mating surfaces on the metering unit (1) and on the coupling opening (6)


Ensure that no dirt between holes:
This may cause the dosing unit to be clogged (1).

Install

7

Install a new filter (3) in the urea inlet (2)

8

Insert the new linking pieces (4) in the bores (7) (arrow)

The new linking pieces (4) are to be pressed in against stop in the bores (7).

9

Install the coupling opening (6) in the metering unit (1) with new bolts (5)

.AdBlue piping coupling nozzle in the dosing device

*BA14.40-B-1005-02G

10

Install the metering unit (1)


.

AR14.40-B-3020A

Exhaust gas after-treatment

Number

Designation

Engine 457.9, 924.9, 926.9 with Liquid Only

BA14.40-B-1005-02G

AdBlue piping coupling nozzle in the dosing device

Nm

22

Odkazované dokumenty