AR14.40-B-2050TC | Remove/install sieve on metering device compressed air inlet for EATS | 12.02.16 |
Cumbustion engine 457 with Vehicle 958.434, 958.443, 958.441, 958.444, 958.453, 958.452, 958.454
Cumbustion engine 457.910 with Vehicle 958.431, 958.433, 958.451, 958.471, 958.472, 958.478
Cumbustion engine 457.911 with Vehicle 695.053, 695.023
Cumbustion engine 460.984 with Vehicle 934.### #R, 934.### #S
W14.40-1518-08
1 Dosing unit
2 Compressed air line
3 Strainer
4 Screwdriver
5 Compressed air inlet
| Remove/install | ||
Danger! | Risk of injury by trapping and crushing when tilting the cab | While tilting the cab forward and back, do not approach the tilting area and take preventive measures to prevent the entry of unauthorized persons. Always tilt the cab to its final position and lock it with the safety device. | |
| Tips on tilting the cab | ||
1 | Tilt the cab | ||
2 | Remove the compressed inlet duct (2) from the dosing unit (1) | Wait until the pressure is released before starting any work on the exhaust gases treatment system. | |
Plug the hole with a suitable sealant. | |||
Installation: Before mounting, inspect the compressed air duct (2) connection for impurities, contaminants and damage. | |||
| |||
3 | Remove the strainer (3) using a screwdriver (4) | ||
4 | Assemble in reverse order | ||
Danger! | Risk of accidents caused by the spontaneous movement of the vehicle when the engine is started. Risk of injury due to trapping and burning caused by contact during the starting procedure or while the engine is running | Secure the vehicle against unintentional movement. Use closed, tightly fit working clothes. Do not touch hot or moving parts. | |
5 | Start the engine | ||
6 | Check the tightness of the dosing unit (1) with the engine running |
Exhaust aftertreatment