1 | Support muffler fastening screws |
2 | Electrical connection of the NOx sensor and control unit assembly (A113) |
3 | Temperature sensor electric connection after the catalyst (B116) |
4 | Temperature sensor electric connection before the catalyst (B115) |
5 | Silencer with catalyser |
B14.40-0090-06
| Remove/install | ||
Topical note | Notes on self-locking nuts and bolts | ||
1 | Turn off ignition | ||
2 | Detach the exhaust piping at the muffler inlet with catalyst (5) | In order to prevent burn injuries, do not carry out the due work when the exhaust piping is hot. | |
.Exhaust pipe on silencer | |||
.Exhaust pipe on silencer | |||
3 | Detach the exhaust piping at the muffler outlet with catalyst (5) | Only for vehicles with CODE (K68) for vertical exhaust piping in the back of the cabin. | |
.Exhaust pipe on silencer | |||
4 | Detach the electrical connection from the NOx sensor and control unit assembly (A113) (2), the electrical connection of the temperature sensor after the catalyst (B116) (3) and the electrical connection of the temperature sensor before the catalyst (B115) (4) | ||
5 | Remove the temperature sensor (B115) at the muffler inlet with catalyst (5) | Remove/install temperature sensor upstream of SCR catalytic converter | |
Remove/install temperature sensor upstream of SCR catalytic converter. | |||
For engines 924.9, 926.9. | |||
For the 457.9 engines | |||
6 | Remove the temperature sensor (B116) at the muffler outlet with catalyst (5) | Remove/install temperature sensor downstream SCR catalytic converter | |
Remove/install temperature sensor downstream SCR catalytic converter. | |||
For engines 924.9, 926.9. | |||
For engines 457.9 | |||
7 | Remove the NO x sensor assembly and command unit (A113) | Remove/install NOx sensor with controller unit | |
Remove/install NOx sensor with controller unit. | |||
For engines 924.9, 926.9. | |||
For engines 457.9 | |||
8 | Support the muffler with catalyst (5) upon a hydraulic jack | Use an appropriate support between the muffler (5) and the hydraulic jack. | |
9 | Loosen the muffler fastening screws on the bracket (1) | .Catalyst on the stringer | |
.Catalytic converter on the longitudinal member | |||
10 | Remove the muffler with catalyst (5) from the longitudinal member support | ||
11 | Install in reverse order |
Odkazované dokumenty
- ah0000n000101a Upozornění k samopojistným šroubům a maticím
- ar1440b2011tb
- ar1440b2011tc
- ar1440b2012tb
- ar1440b2012tc
- ar1440b2038tb
- ar1440b2038tc