AR14.40-B-2009B | Remove/install pressure filter at pump module of exhaust aftertreatment system | 12.02.16 |
Cumbustion engine 457.9 with Vehicle 382.15# #D, 634.0## #D with CODE MS5 (BlueTec 5)
W14.40-1018-08
1 Pump module
2 Insulating hose
3 Pipe opening (AdBlue feed)
4 AdBlue pipe (feed)
5 AdBlue pipe (return)
6 Pipe opening (AdBlue return)
7 Pressure filter housing
8 Filter element
9 Filter bowl
| Removing and installing | ||
Danger! | Risk of burns and scalding while working on AdBlue pipes and components connected to them. Risk of injury on skin and eyes at contact with AdBlue. Risk of poisoning from swallowing AdBlue | Only catch AdBlue in appropriate containers. Only start working on the exhaust gas after-treatment system after relieving the pressure. | |
| Indications for applications, material properties and handling AdBlue | Suitably seal the openings. | |
1 | Loosen the catches on AdBlue pipes (4,5) | | |
2 | Remove the filter bowl (9) with the filter element (8) in the pressure filter housing (7) | Install Clean the pressure filter housing (7) and replace the filter bowl (9) together with the filter element (8). Before installing, apply a thin coat of MB silicone grease on the O-ring of the filter element (8) and of the filter body (9). | |
As a sliding agent utilize the MB specified silicone grease. The silicone grease application has to be extremely moderate, otherwise damage may occur in the exhaust gas after-treatment system. | |||
| |||
3 | Install in reverse order | ||
4 | Check the filter bowl (9) for leaks |
Exhaust aftertreatment
Número | Denominação | Engine 457.9 with Code MS5 | |||
BA14.40-B-1001-02C | Filter bowl on the pump module | Nm | 32 | ||
000 589 54 37 00
Clamp
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1042-06A | ABS sensor grease | A 000 989 62 51 |