ar1440b2001a

Remove/install injection line for exhaust aftertreatment system

Typ ar · téma 14.40 · verze 0301 · 2019-11-08

Platí pro: Engine 924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2 Engine 926.9 in model 368, 382.17/18, 384.0

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 14 Sběrné výfukové potrubí, motorová brzda, zařízení pro snížení obsahu škodlivin ve výfukových plynech › 14.40 Dodatečná úprava spalin, AdBlue — Řada 368 · Řada 382 (modely 17*, 18*) · Řada 384 (modely 0**, 2**) · Řada 685 (modely 282, 284, 289, 290) · Řada 979 (modely 2**)

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.13 Potrubí/hadice/ventil — Řada 368 · Řada 382 (modely 17*, 18*) · Řada 384 (modely 0**, 2**) · Řada 685 (modely 282, 284, 289, 290) · Řada 979 (modely 2**)

Platí také pro motory/převodovky: 924 9**, 926 9**

AR14.40-B-2001A

Remove/install injection line for exhaust aftertreatment system

23.10.2019

Engine

924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2

Engine

926.9 in model 368, 382.17/18, 384.0

Remove/install injection line for exhaust aftertreatment system

Represented on vehicle 382.177

1

Metering unit

2

Injection pipe

3

Injector nozzle

B14.40-0049-06

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Open the access cover to the engine compartment

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

Access to carry out maintenance and repair work, varies with body type/make.

Refer to the body makers instructions.

2

Remove the injection line (2)

Seal the orifices with an appropriate plug.

Installation: replace the injection line (2) after each removal.

.Box nut of the injector pipe on injector block

*BA14.40-B-1003-02B

.Box nut of the injection on dosage unit

*BA14.40-B-1004-02B

3

Install in reverse order

Exhaust gas after-treatment

Number

Designation

Engine 924.9, 926.9 except Liquid Only

BA14.40-B-1003-02B

Box nut of the injector pipe on injector block

Nm

14

Exhaust gas after-treatment

Number

Designation

Engine 924.9, 926.9 except Liquid Only

BA14.40-B-1004-02B

Box nut of the injection on dosage unit

Nm

14

Odkazované dokumenty