1 | Compressor |
2 | Drive gear |
3 | Nut |
4 | Fixing device |
4.1 | Adapter (of the fixing device extension) |
W13.30-1199-03
| Remove | ||
1 | Remove the compressor (1) | ||
2 | Clamp the fixing device (4) in the vise and, if necessary, install the correct adapter (4.1) on the fixing device (4) | Use the respective adapter (4.1) for the drive gear (2). | |
Locating tool | |||
3 | Install the compressor (1) on the fixing device (4) | ||
4 | Loosen the nut (3) | Note the left-hand thread of the nut (3). | |
5 | Loosen the drive gear (2) | If necessary, extract the drive gear (2) using an three-claw pull-off device (300 mm). | |
6 | Remove the nut (3) | ||
7 | Remove the drive gear (2) from the compressor (1) | If the drive gear (2) is replaced due to a damage, the drive gear of the drive mechanism must also be checked for damage. | |
| Install | ||
8 | Install the drive gear (2) on the compressor (1) | ||
9 | Tighten the nut (3) | Note the left-hand thread of the nut (3) | |
Nut (left-hand thread) of the drive gear in the compressor | |||
10 | Remove the compressor (1) from the fixing device (4) | ||
11 | Install the compressor (1) |
470 589 08 40 00
Locating tool