Remove/install poly-V belt tensioning device

AR13.25-W-3200C

Remove/install poly-V belt tensioning device

2.7.10

 

Remove/install

1

Open maintenance flap

 Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.

AS60.80-Z-0001-01A

2

Tilt cab



Notes on tilting the cab

AH60.80-N-0003-01A

3

Swivel tensioner pulley for poly-V belt tensioning device (3) downwards (arrow), and remove poly-V belt (1) at the alternator belt pulley as well as the tensioner pulley on the poly-V belt tensioning device (3)

 Do not remove poly-V-belt (1).

 Installation: Pay attention to correct seating of poly-V belt (1).

Observe poly-V-belt routing plan.

AR13.22-W-3902-02D

4

Remove bolt (2) and poly-V belt tensioning device (3) at holder

 Check poly-V belt tensioning device (3) for wear and damage; replace if necessary.

 Installation: First insert pins into the mounting bores on the rear side of the poly-V belt tensioning device (3).



*BA13.25-N-1001-01C



Checking

5

Check condition of poly-V belt (1)

 Replace poly-V belt (1) if necessary.

Damage profiles for a poly-V belt

AP13.22-D-1351-01A

6

Install in the reverse order

Number

Designation

Engine
900.9, 902.9, 904.9, 906.9

Engine
924.9, 925.9, 926.9

BA13.25-N-1001-01C

Bolt of poly-V-belt tensioning device to oil filter housing

Nm

50

50