ar1325b4015evi

Remove/install poly-V belt single tensioning device for basic belt drive

Typ ar · téma 13.25 · verze 0100 · 2019-02-19

Platí pro: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 13 Vzduchový kompresor, řemenový převod › 13.25 Napínač řemene — Řada 382 (modely 155, 189) · Řada 936 (modely 9**)

EinPAS 15 Motor › 15.18 Řemenový pohon › 15.18.30 Řemen/řemenice/napínací ústrojí/vratná kladka — Řada 382 (modely 155, 189) · Řada 936 (modely 9**)

AR13.25-B-4015EVI

Remove/install poly-V belt single tensioning device for basic belt drive

08.10.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Remove/install poly-V belt single tensioning device for basic belt drive

1

Poly-V belt

2

Pressure piece

Seta

Pin

B14.20-A000-05

Warning

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves.

AS00.00-Z-0001-01A

Topical note

Notes on self-locking nuts and bolts

AH00.00-N-0001-01A

Remove/install

1

Open the engine compartment

The access to perform maintenance and repair works varies according to the manufacturer and the body type.

2

Remove the acoustic encapsulations

3

Slacken the poly-V belt (1) and remove it from the tensioning device (2)

AR13.22-B-3902-05EVI

Belt drive routing diagram

AR13.20-B-1000-01EVI

Check

4

Check the conditions of the poly-V belt (1) and replace it if necessary

Damage profiles for a poly-V belt

AP13.22-B-1351-01A

5

Remove the tensioning device (2)

Installation: The pins (arrows) in the tensioning device (2) must fit in the holes on the coolant pump housing.

Clamping device screw on the coolant pump

*BA13.25-B-1002-01EVI

6

Install in reverse order

Polly-V belt clamping device

Number

Designation

ENGINE 936.9

BA13.25-B-1002-01EVI

Clamping device screw on the coolant pump

M10

Nm

50

Odkazované dokumenty