P13.22-2146-11
1 Expansion clip
2 Cover
P13.22-2141-06
4 Poly-V belt
5 Tensioning device
6 Locking pin
| Removing | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities | No parts of the body or limbs should be within the operating range of the mechanical components when moving components. | |
Danger! | Risk of death caused by vehicle slipping or toppling off the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Raise vehicle with vehicle lift | ||
2 | Remove expansion clips (1) and remove cover (2) | ||
3 | Detention clamping device (5) using a wrench and secure using a suitable locking pin (6) | The locking pin (6) should have a diameter of about 4 mm. | |
| |||
4 | Remove poly-V belt (4) | ||
| Install | ||
5 | Fit on poly-V belt (4) | Check poly-V belt (4) before installing for wear and damage. | |
6 | Detention clamping device (5) using a wrench and remove locking pin (6) | | |
7 | Position cover (2), insert expansion clip (1) and fix in place with a pin | ||
8 | Lower vehicle |
Wrench SW 12
451 589 00 10 00
Odkazované dokumenty
- as0000z000901a Nebezpečí poranění přivřením nebo přiskřípnutím, v extrémním případě amputací končetin při zásazích do mechaniky
- as0000z001001a Nebezpečí ohrožení života v případě sesunutí nebo překlopení vozu z dílenského zvedáku