AR13.22-P-1202MCC | Remove/install poly-V belt | 30.10.08 |
ENGINE 132.9 in MODEL 451.3 (except 451.334)
ENGINE 132.9 in MODEL 451.3 (except 451.380)
ENGINE 132.9 in MODEL 451.4 (except 451.480)
P13.22-2142-02
1 Expansion clip
2 Pin
3 Cover
P13.22-2141-06
4 Poly-V belt
5 Tensioning device
6 Locking pin
| Removing | ||
Danger! | Risk of injury caused by moving parts that can pinch, crush or, in extreme cases, even sever extremities | No parts of the body or limbs should be within the operating range of the mechanism when moving components. | |
Danger! | Risk of death caused by vehicle slipping or toppling off the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Raise vehicle with vehicle lift | ||
2 | Pull out pins (2) using suitable pliers from the expansion clip (1), remove expansion clip (1) and cover (3) | ||
3 | Detention clamping device (5) using a wrench and secure using a suitable locking pin (6) | The locking pin (6) should have a diameter of about 4 mm. | |
| |||
4 | Remove poly-V belt (4) | ||
| Install | ||
5 | Fit on poly-V belt (4) | Check poly-V belt (4) for wear and damage before installation and replace if necessary. | |
6 | Detention clamping device (5) using a wrench and remove locking pin (6) | | |
7 | Position cover (3) and install expansion clip (1) | ||
8 | Lower vehicle with lifting platform |
Wrench SW 12
451 589 00 10 00
Odkazované dokumenty
- as0000z000901a Nebezpečí poranění přivřením nebo přiskřípnutím, v extrémním případě amputací končetin při zásazích do mechaniky
- as0000z001001a Nebezpečí ohrožení života v případě sesunutí nebo překlopení vozu z dílenského zvedáku