AR13.21-T-1201AA | Removing and installing poly-V-belt for coolant pump and generator | 28.6.01 |
ENGINE 457.942 in MODELS NMB671.015 /020 /021 /030 /042 /332 /333
T13.21-0017-06
Illustrated on model 671.042
1 Poly-V-belt for coolant pump and generator
4 Poly-V-belt for refrigerant compressor on air conditioning system
5 Automatic tensioning device
6 Bolt
| Removing/installing | ||
1 | Open rear lid | ||
2 | Detach engine compartment paneling under the engine | ||
3 | Fold down bumper cover | ||
4.1 | Remove poly-V-belt for air conditioning system compressor (4) | Only on model 671.015/020/021/030/042 | |
5 | Tension automatic tensioning device (5) by turning bolts (6) | ||
6 | Remove poly-V-belt (1) for coolant pump and generator | Do not buckle poly-V-belt for coolant pump and generator (1) to avoid damage. | |
Installation: Observe running diagram for poly-V-belt for coolant pump and generator (1): | |||
| |||
| Poly-V-belt running diagram | ||
| Checking | ||
7 | Check for damage and general condition of poly-V-belt for coolant pump and generator (1), replace if necessary | ||
| Damage patterns for poly-V-belt | ||
8 | Install in reverse order |