AR09.41-G-1510MTA | Remove/install charge air cross pipe | 10.1.07 |
ENGINE 444.901 in MODEL 000.001
Euro 1
ENGINE 444.901 in MODEL 000.001
Euro 2
G09.41-3129-11
Shown on engine 444.901 Euro 2
1 Charge air cross pipe
2 Bolts
3 Fuel filter
4 Bolts
5 Seal
6 Intermediate pipe
7 Sealing ring
| Remove/install | ||
1 | Detach fuel filter (3) from charge air cross pipe (1) | ||
2 | Unscrew bolt (2) | Installation: Observe sleeves between charge air cross pipe (1) and holder. | |
3 | Remove the charge air cross pipe (1) | Installation: Check sealing ring (7) on intermediate pipe (6); replace if necessary. | |
4 | Remove bolts (4) and intermediate pipe (6) from charge air cross pipe (1) | If required | |
Installation: Clean sealing surfaces on charge air cross pipe (1) and on intermediate pipe (6). Check condition of seals (5), replace if necessary. | |||
| |||
| |||
5 | Install in the reverse order |
Charge air duct
Number | Designation | Engine | ||
BA09.41-N-1003-02A | Bolt, charge air cross pipe to intermediate pipe | M12 | Nm | 80 |
Torque wrench
000 589 64 21 00