ar0940t200002a

Conducting charge pressure test

Typ ar · téma 09.40 · verze 0100 · 2005-07-12

Platí pro: ENGINE 447, 489 in MODEL 671

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 09 Sání vzduchu, plnění › 09.40 Turbodmychadlo — Řada 447 · Řada 671

EinPAS 15 Motor › 15.30 Sání vzduchu/přeplňování › 15.30.1 Základní informace — Řada 447 · Řada 671

Platí také pro motory/převodovky: 489 ***

AR09.40-T-2000-02A

Conducting charge pressure test

Test data of turbocharger

Number

Designation

Engine 447

Engine 489

BE09.40-N-1001-01A

Charge pressure of turbocharger

bar

0.7

0.7

Test on chassis dynamometer

1 Rev up vehicle to top speed of a gear.

2 Apply load to dynamometer and read off charge pressure tester.

----------------------------------------------------------------------------------------

Test without chassis dynamometer

1.1 Load vehicle up to permissible payload.

2.1 Conduct road test by simulating load conditions (accelerating on hill or gentle operation of parking brake) and read off charge pressure at HHT.

----------------------------------------------------------------------------------------

If the charge pressure is less than the specified pressure, remove turbocharger and test, replace if necessary.