ar0940p6925lfd

Remove/install noise damper downstream of charge air cooler

Typ ar · téma 09.40 · verze 0100 · 2013-04-11

Platí pro: ENGINE 642 in MODEL 222

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 09 Sání vzduchu, plnění › 09.40 Turbodmychadlo — Řada 222

EinPAS 15 Motor › 15.30 Sání vzduchu/přeplňování › 15.30.45 Chladič plnicího vzduchu — Řada 222

Platí také pro motory/převodovky: 642 ***

AR09.40-P-6925LFD

Remove/install noise damper downstream of charge air cooler

05.04.2013

ENGINE

642 in MODEL 222

Remove/install noise damper downstream of charge air cooler

1

Silencer downstream of the charge air cooler

2

Bolts

P09.40-2465-11

Danger !

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Remove/install

1

Remove engine cover

Installation: Ensure correct seating.

2

Remove screw/bolts (2)

Noise damper downstream of charge air cooler to mixing chamber

*BA09.41-P-1007-01J

3

Remove noise damper downstream of charge air cooler (1)

Installation:
Check sealing ring for damage and replace on the case of damage.
In this way one can avoid leaks and damage on the engine.

4

Install in the reverse order

Danger !

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

5

Carry out an engine test run

Charge air pipe/charge air cooling

Number

Designation

ENGINE 642

BA09.41-P-1007-01J

Noise damper downstream of charge air cooler to mixing chamber

Nm

9

Odkazované dokumenty