P09.10-2041-06
Shown on engine 137 in model 215
1 Left air intake pipe
2 Right air intake pipe
3 Bolt
4 Cover
5 Bolts
6 Air cleaner
| Removing, installing | ||
1 | Remove air intake hoses (1, 2) | ||
2 | Unscrew bolt (3) and lift cover (4) up and off | ||
3 | Unscrew bolts (5) | ||
4 | Pull out air cleaner (6) to the front | Ensure that the hot film mass air flow sensor is not pulled off the electronic accelerator actuator. | |
5 | Install in the reverse order | Installation: Air cleaner (6) is fixed in place on the right and left at the intake manifold |