ar0910g8131de

Remove/install air intake pipe

Typ ar · téma 09.10 · verze 0101 · 2019-10-07

Platí pro: Engine 902.90 in model 000.001 Engine 906.90 in model 000.001

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 09 Sání vzduchu, plnění › 09.10 Vzduchový filtr — Řada 000 (modely 001) · Řada 902 (modely 90*) · Řada 906 (modely 90*)

EinPAS 15 Motor › 15.30 Sání vzduchu/přeplňování › 15.30.33 Sací potrubí/potrubí plnicího vzduchu — Řada 000 (modely 001) · Řada 902 (modely 90*) · Řada 906 (modely 90*)

AR09.10-G-8131DE

Remove/install air intake pipe

17.09.2019

Engine

902.90 in model 000.001

Engine

906.90 in model 000.001

Remove/install air intake pipe

1

Air intake pipe

2

Electrical connector

3

Clip

4

Charge air pipe

5

Bracket

6

Vent hose

7

Air intake hose

8

Compressor air intake hose

9

Bracket

W09.10-1007-06

Remove

Danger

Risk of explosion due to escaping combustible gas or overheating of gas cylinders.Risk of injury caused by burns to skin and eyes. Risk of frostbite to body parts caused by escaping gas and by touching components near the valves when emptying gas cylinders. Risk of poisoning or suffocation caused by inhaling gas.

Remove any sources of ignition.
Protective clothing, safety gloves and safety glasses must always be worn.
Ensure that the work area is adequately ventilated.
When working on vehicles at ambient temperatures over 60 °C, all gas cylinders must be removed.

AS00.00-Z-0018-01A

Notes on work safety regulations for vehicles with natural gas-powered engines

AH00.10-N-1000-04A

1

Remove bracket (5) at charge air pipe (4) and release at coolant pump.

Bracket to coolant pump

*BA20.10-N-1005-01L

2

Remove clamp (3) and release charge air pipe (4) from charge-air distributor.

Installation: Clean sealing surfaces. Replace sealing ring.

3

Expose electrical connector (2) at charge-air distributor and disconnect.

4

Remove vent hose (6) at air intake pipe (1).

5

Remove compressor air intake hose (8) at air intake pipe (1).

6

Remove air intake pipe (1) at air filter housing air intake hose.

7

Release clamps at air intake hose (7).

8

Remove air intake pipe (1) at bracket (9).

9

Pull out air intake pipe (1) from air intake hose (7) and remove.

10

Install in the reverse order

Coolant pump, coolant thermostat

Number

Designation

Engine 900.9, 902.9, 904.9, 906.9 in model 000.001

BA20.10-N-1005-01L

Bracket to coolant pump

Nm

50

Odkazované dokumenty