B09.10-0088-06
1 Clamps
2 Hose that connects the intake tubes to the turbocharger
3 Air filter intake tubes to the turbocharger
4 Clamp
5 Hose that connects the intake tubes to the air filter
6 Intake tubes hose to the relief valve
7 Electric wires
8 Air compressor intake hose
9 Intake tubes hose to the breather valve (PCV)
10 Intake tubes hose to the relief valve
11 Bolts that fastens the air tubes and the electric cables support
12 Electric wires support
| Remove and install | ||
Danger! | Safety measures to perform maintenance services in a gas engine. | ||
Danger! | Turn off the main switch or disconnect the negative battery cable. | ||
| Access for maintenance and repair work execution vary according to the body type/manufacturer. | Refer to body maker instructions. | |
1 | Unfasten the clamps (1) that fasten the hose (2). | Install: Check the clamps and the hose, replace them, if necessary. | |
2 | Unfasten the clamp (4) that fastens the hose (5). | Install: Check the clamp and the hose, replace them if necessary. | |
3 | Disconnect the hoses (6), (8), (9) and (10) from the tubes (3). | Install: Check the clamps and the hose, replace them, if necessary. | |
4 | Disconnect the electric wires (7). | Unlock the connector and pull it, to remove it from the sensor terminal. | |
5 | Remove the screws (10). | ||
6 | Carefully move the support (11) with the electric wires. | Move the support with the electric wires (11) away from the tubes. | |
7 | Remove the air intake tubes (3). | ||
8 | Install in reverse order. |