ar0715g1629dd

Perform precise parameterization of engine control unit (MR/PLD)

Typ ar · téma 07.15 · verze 0100 · 2019-10-04

Platí pro: Engine 900.91/92 in model 000.001 Engine 902.91/93 in model 000.001 Engine 904.94/95/96/97 in model 000.001 Engine 906.93/94/95/96/98/99 in model 000.001 Engine 924.91/93/94 in model 000.001 Engine 925.9 in model 000.001 Engine 926.91/92/93/95/97/98 in model 000.001

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.15 Systém vstřikování paliva vznětového motoru (PLD), regulace motoru (MR) — Řada 000 (modely 001) · Řada 900 (modely 91*, 92*) · Řada 902 (modely 91*, 93*) · Řada 904 (modely 94*, 95*, 96*, 97*) · Řada 906 (modely 93*, 94*, 95*, 96*, 98*, 99*)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.11 Řídicí jednotka/relé — Řada 000 (modely 001) · Řada 900 (modely 91*, 92*) · Řada 902 (modely 91*, 93*) · Řada 904 (modely 94*, 95*, 96*, 97*) · Řada 906 (modely 93*, 94*, 95*, 96*, 98*, 99*)

Platí také pro motory/převodovky: 924 91*, 924 93*, 924 94*, 925 9**, 926 91*, 926 92*, 926 93*, 926 95*, 926 97*, 926 98*

AR07.15-G-1629DD

Perform precise parameterization of engine control unit (MR/PLD)

23.08.2019

Engine

900.91/92 in model 000.001

Engine

902.91/93 in model 000.001

Engine

904.94/95/96/97 in model 000.001

Engine

906.93/94/95/96/98/99 in model 000.001

Engine

924.91/93/94 in model 000.001

Engine

925.9 in model 000.001

Engine

926.91/92/93/95/97/98 in model 000.001

Perform precise parameterization of engine control unit (MR/PLD)

Displayed picture is only one example

G07.15-A004-04

Notes on the precision parameterization of the engine control unit (MR/PLD)

AH07.15-N-1000-01A

Parameterization

1

Switch on ignition.

See information from body manufacturer.

2

Connect diagnostic unit.

See information from body manufacturer.
The fine parameterization on the MR/PLD control unit can be performed only with the diagnostic device and a chip card.

3

Insert chip card, switch on diagnostic device, and select engine model designation.

See information from body manufacturer.

4

Select special functions.

5

Select EOL module for performance correction and confirm with "yes".

6

In the "Functions" menu, select the menu item "Parameterization" and confirm with the ENTER key.

7

In the "PLD/MR parameterization" menu, change the equipment code.

If the engine output is outside of the output tolerance, the engine output can be set to the output tolerance at various engine speeds through fine parameterization of the MR/PLD control unit.

Odkazované dokumenty