AR07.15-B-9235TA | Remove/install MR/PLD injection lines | 12.02.16 |
Cumbustion engine 904.9 with Vehicle 958
Cumbustion engine 906.9 with Vehicle 958
W07.15-0085-12
Represented in engine 904.9
1 Engine coating
2 Injection tubes
| Remove | ||
Danger! | Risk of injury due to being caught and smashed when tilting the cabin | During the cabin tilting operation back and forth, do not go in its inclination area and take preventive measures to avoid that non-authorized people get into it. Always tilt the cabin up to its final position and lock it with the safety device. | |
1.1 | Tilt the cabin | ||
| Indications about the cabin tilting | ||
2 | Remove the left side encapsulation | ||
3 | Remove the engine coating (1) | ||
Danger! | Risk of explosion by inflammation, risk of poisoning by inhalation and fuel ingestion, as well as risk of injury by contact of fuel to the skin and eyes. | It is forbidden to smoke, set fire, sparks or open flame. Only store fuel in appropriate and respectively identified containers. When handling fuel use appropriate protective clothing and equipment | |
4 | Remove the tubes from the injectors (2) | | |
| |||
| Install | ||
Danger! | Risk of explosion by inflammation, risk of poisoning by inhalation and fuel ingestion, as well as risk of injury by contact of fuel to the skin and eyes | It is forbidden to smoke, set fire, sparks or open flame. Only store fuel in appropriate and respectively identified containers. When handling fuel use appropriate protective clothing and equipment | |
5 | Install new injector tubes (2) | Whenever the injector tubes (2) are removed, they must compulsorily be replaced. Do not bend the injection tubes (2), observe their installation position | |
| |||
| |||
| |||
Danger! | Risk of accident due to the involuntary movement when the engine is operating. Risk of injury due to being smashed and burns due to contact during the start-up process or with the operating engine | Make sure that the vehicle will not accidentally move. Wear work clothes well closed and tight. Do not touch the heated or moving parts. | |
6 | Actuate the engine start-up and bleed the fuel system | The fuel system performs the bleed automatically. Let the engine operating for approx. 1 min, if the engine stops or does not start to operate, repeat the start-up process after 2 min. | |
7 | Shutdown the engine | ||
8 | Check the tightness of the new tubes of the injectors (2). | In the case of leaks, replace the damaged new injector tubes (2). | |
9 | Install the engine coating (1) | ||
10 | Install the left side encapsulation | ||
Danger! | Risk of injury due to being caught and smashed when tilting the cabin | During the cabin tilting operation back and forth, do not go in its inclination area and take preventive measures to avoid that non-authorized people get into it. Always tilt the cabin up to its final position and lock it with the safety device. | |
11.1 | Return the cabin to its position | ||
| Indications about the cabin tilting |
Diesel injection system with unit pumps (MR/PLD)
Número | Denominação | Engine 904.9, 906.9, 924.9, 926.9 without code MS8 | |||
BA07.15-B-1004-01A | Injection pipe of the injection unit to the injector's pressure tube | Only for the tube A 906 070 14 33 | 1st stage | Nm | 10 |
2nd stage | angular | 80° | |||
Only for the tube A 906 070 24 33 | 1st stage | Nm | 15 | ||
2nd stage | angular | 90° | |||
000 589 07 03 00
Box wrench
000 589 68 03 00
Box wrench adapter