ar0715b1628dd

Remove/install MR/PLD control unit

Typ ar · téma 07.15 · verze 0102 · 2020-02-19

Platí pro: Engine 926.942 in model 382.171/176 Engine 926.95

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.15 Systém vstřikování paliva vznětového motoru (PLD), regulace motoru (MR) — Řada 382 (modely 171, 176)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.11 Řídicí jednotka/relé — Řada 382 (modely 171, 176)

Platí také pro motory/převodovky: 926 942, 926 95*

AR07.15-B-1628DD

Remove/install MR/PLD control unit

03.02.2020

Engine	926.942 in model 382.171/176
Engine	926.95

Remove/install MR/PLD control unit

1	Engine block
2	Spacer
3	Rubber shock absorbers
4	Bolt
5	Vehicle harness connector
6	Vehicle harness connector
7	Connector
8	Bolt
A6	Control unit MR/PLD

W07.15-1026-11

 	Remove/install
1	Turn off ignition
2	Remove tube that connects the air filter to the turbo-compressor
3	Unfasten and disconnect the vehicle wiring harness (5) at the MR/PLD (A6) control unit	 Press the retaining clip to release the vehicle wiring harness (5).
4	Unfasten and disconnect the vehicle wiring harness (6) at the MR/PLD (A6) control unit	 Unfasten the wiring harness from the engine (6) turning the locking arm.
5	Remove the MR/PLD (A6) control unit from the crankcase	 The MR/PLD (A6) control unit cannot be disassembled.
		 install: Pre-assemble the spacers (2) and the rubber shock absorbers (3) with bolts (4) in the MR/PLD (A6) control unit. Pay attention to the assemblage position of the rubber shock absorbers (3).
		 Engine block control unit	*BA07.15-B-1002-01A
6	Install in reverse order

 Diesel injection system with injection unit (MR/PLD)

Number	Designation		Engine 904.9, 906.9, 924.9, 926.9
BA07.15-B-1002-01A	Engine block control unit	Nm	15