ar0705s7009a

Removing and installing throttle flap switchover valve

Typ ar · téma 07.05 · verze 0100 · 1998-07-06

Platí pro: ENGINE 601.942 in MODEL 638.064 /164 with CODE (MS5) Low emission engine stage II

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.05 Ventily — Řada 601 (modely 942) · Řada 638 (modely 064, 164)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.13 Potrubí/hadice/ventil — Řada 601 (modely 942) · Řada 638 (modely 064, 164)

AR07.05-S-7009A

Removing and installing throttle flap switchover valve

13.10.97

ENGINE 601.942 in MODEL 638.064 /164 with CODE (MS5) Low emission engine stage II

Removing and installing throttle flap switchover valve

S14.20-2523-06

1 Connection for hose (atmosphere)

2 Connection for vacuum hose (inlet)

3 Connection for vacuum hose (outlet)

4 Connector

5 Spring

Y79 Throttle flap switchover valve

Removing, installing

1

Unplug connector (4) at throttle flap switchover valve (Y79)

2

Slacken clamps at connections (1), (2), (3) at throttle flap switchover valve (Y79)

Installing: fit on new clamps

3

Detach hose at connection (1) at throttle flap switchover valve (Y79)

4

Detach vacuum hose at connection (2) at throttle flap switchover valve (Y79)

5

Detach vacuum hose at connection (3) at throttle flap switchover valve (Y79)

6

Take throttle flap switchover valve (Y79) off the bracket

Apply pressure to spring (5) and at the same time take throttle flap switchover valve (Y79) off the bracket

7

Install in the reverse order