ar0704t0003a

Remove/install needle movement sensor of injection nozzle

Typ ar · téma 07.04 · verze 0101 · 2009-11-19

Platí pro: ENGINE 447, 489 in MODEL 671

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.04 Snímače, čidla, senzory — Řada 447 · Řada 671

EinPAS 15 Motor › 15.45 Management motoru › 15.45.42 Rozdělovač paliva / rail / tryska / vstřikovač — Řada 447 · Řada 671

Platí také pro motory/převodovky: 489 ***

AR07.04-T-0003A

Remove/install needle movement sensor of injection nozzle

3.11.09

ENGINE 447, 489 in MODEL 671

Remove/install needle movement sensor of injection nozzle

T07.03-0004-06

Remove/install

1

Open engine compartment flap and maintenance flap at the rear left

2

Open connecting cable connector

Protect needle movement sensor connector against damage and contamination

To do this press metal clamp in the direction of the arrow (1) and detach the connector (2)

3

Remove injection nozzle with claw wrench

During remove/install ensure that the connecting cable is not twisted off or damaged

To do this lead the cable connector through the claw wrench and lay the connecting cable in the slot

*BA07.03-N-1002-01A

*442589000700

4

Install in the reverse order

Injectors, injection valves, lines

Number

Designation

Engine 447

Engine 489

BA07.03-N-1002-01A

Thrust bolt, injection nozzle to cylinder head

Nm

70

70

Remove/install needle movement sensor of injection nozzle

Puller

442 589 00 07 00