ar0704s7005a

Removing and installing boost and intake pressure sensor

Typ ar · téma 07.04 · verze 0100 · 1998-07-06

Platí pro: ENGINE 601.970 in MODEL 638.074 /174 /274 with CODE (MS5) Low emission engine stage II

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.04 Snímače, čidla, senzory — Řada 601 (modely 970) · Řada 638 (modely 074, 174, 274)

EinPAS 15 Motor › 15.30 Sání vzduchu/přeplňování › 15.30.12 Snímač/spínač/kabelový svazek — Řada 601 (modely 970) · Řada 638 (modely 074, 174, 274)

AR07.04-S-7005A

Removing and installing boost and intake pressure sensor

13.10.97

ENGINE 601.970 in MODEL 638.074 /174 /274 with CODE (MS5) Low emission engine stage II

Removing and installing boost and intake pressure sensor

S07.12-2531-06

1 Connector

2 Hose

3 Bolt

4 Bracket

B47 Boost and intake pressure sensor

Removing, installing

1

Unplug connector (1) from boost and intake pressure sensor (B47)

2

Remove clamp at hose (2)

Installing: replace clamp at hose (2)

3

Detach hose (2) from boost and intake pressure sensor (B47)

4

Unscrew bolt (3) of boost and intake pressure sensor (B47) at bracket (4)

*BA07.04-N-1001-01A

5

Take boost and intake pressure sensor (B47) off bracket (4)

6

Install in the reverse order

Mixture formation senders, sensors

Number

Designation

Engine 601.970 with code MS5

BA07.04-N-1001-01A

Bolt of boost and intake pressure sensor to body

Nm

11