Removing, installing microswitch at injection pump

Typ ar · téma 07.04 · verze 0101 · 1998-07-06

Platí pro: ENGINE 601.942 in MODEL 638.064 /164 with CODE (KD1) Emission control system (oxidation catalytic converter) with CODE (MS5) Low emission engine stage II ENGINE 601.970 in MODEL 638.074 /174 /274 with CODE (KD1) Emission control system (oxidation catalytic converter)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.04 Snímače, čidla, senzory — Řada 601 (modely 942, 970) · Řada 638 (modely 064, 074, 164, 174, 274)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.12 Snímač/spínač/kabelový svazek — Řada 601 (modely 942, 970) · Řada 638 (modely 064, 074, 164, 174, 274)

AR07.04-S-2280A

Removing, installing microswitch at injection pump

17.11.97

ENGINE 601.942 in MODEL 638.064 /164
with CODE (KD1) Emission control system (oxidation catalytic converter)
with CODE (MS5) Low emission engine stage II

ENGINE 601.970 in MODEL 638.074 /174 /274 with CODE (KD1) Emission control system (oxidation catalytic converter)

Removing, installing microswitch at injection pump

S07.10-0501-06

1 Connector

S70 Microswitch

Fig. item, etc.	Work instructions
	Screw for attaching microswitch (S70) to injection pump
1	Microswitch connector (S70)	Unplug the connector of the microswitch (S70).
S70	Microswitch	Unscrew microswitch (S70) at the injection pump.

 Exhaust gas recirculation

Number	Designation		Engine 601.970 with code MS5


BA14.20-N-1002-01B	Screw of microswitch to injection pump	Nm	2.5