Remove/install camshaft position sensor

Typ ar · téma 07.04 · verze 0102 · 2001-10-29

Platí pro: ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6 ENGINE 611.983 in MODEL 690.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AR07.04-D-0011A

15.4.99

ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

D07.04-0006-05

Shown on engine 611

1 CMP sensor

2 Connector

3 Sealing ring

 	Remove/install
1	Remove top part of charge air distribution pipe	 Only on engine 611.981/983/987	AR09.41-D-1312A
2	Remove trim panel of cylinder head cover		AR01.20-D-5015A
3	Unplug connector (2) at camshaft position sensor (1)
4	Detach camshaft position sensor (1) at cylinder head cover and pull out	Installation: Replace seal (3)
			*BA07.04-N-1002-01B
5	Install in the reverse order

 Sensors

Number	Designation		Engine 611.981/ 983/987	Engine 612.981


BA07.04-N-1002-01B	Bolt of camshaft position sensor to cylinder head cover	Nm	11	11