ar0703g671202mt

Checking spray jet pattern and chatter characteristics of injection nozzle

Typ ar · téma 07.03 · verze 0102 · 2012-05-30

Platí pro: MODEL 000.001 with ENGINE 444.901 Euro 2 MODEL 000.001 with ENGINE 444.901 Euro 1 MODEL 000.001 with ENGINE 447.903 Euro 2

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 07 Příprava směsi › 07.03 Vstřikovací trysky, vstřikovací ventily, vedení — Řada 000 (modely 001) · Řada 444 (modely 901) · Řada 447 (modely 903)

EinPAS 15 Motor › 15.45 Management motoru › 15.45.42 Rozdělovač paliva / rail / tryska / vstřikovač — Řada 000 (modely 001) · Řada 444 (modely 901) · Řada 447 (modely 903)

AR07.03-G-6712-02MT

Checking spray jet pattern and chatter characteristics of injection nozzle

Danger !

Risk of explosion caused by test oil being ignited. Risk of injury to skin and eyes caused by test oil streaming out

Keep all ignition sources out of the hazard area. Only check injection nozzles in the nozzle testing device. Do not touch the injection nozzle stream.

AS07.03-Z-0001-01A

MODEL

000.001 with ENGINE 444.901

Euro 2

MODEL

000.001 with ENGINE 444.901

Euro 1

MODEL

000.001 with ENGINE 447.903

Euro 2

Checking spray jet pattern and chatter characteristics of injection nozzle

000 589 14 27 00

Tester

Chatter:

Good chatter at a rapid and slow lever speed. Small, chatterless ranges can arise in between.

Spray pattern:

Dispersed jets with a large degree of atomization at a low test speed. An unatomized solid jet in a chatterless range. The jets are full and fine-grained atomized with increasing lever speed.

Odkazované dokumenty