ar0520t2340b

Remove/install rocker arms

Typ ar · téma 05.20 · verze 0102 · 2005-07-12

Platí pro: ENGINE 441.980 in MODEL 613.355 /364 /365 ENGINE 402.970, 446.938 in MODEL 613.455 /485

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 05 Rozvod motoru › 05.20 Vačkový hřídel, přestavení vačkového hřídele — Řada 441 (modely 980) · Řada 613 (modely 355, 364, 365, 455, 485)

EinPAS 15 Motor › 15.17 Rozvod motoru › 15.17.30 Ventilový rozvod — Řada 441 (modely 980) · Řada 613 (modely 355, 364, 365, 455, 485)

Platí také pro motory/převodovky: 402 970, 446 938

AR05.20-T-2340B

Remove/install rocker arms

11.5.00

ENGINE 441.980 in MODEL 613.355 /364 /365

ENGINE 402.970, 446.938 in MODEL 613.455 /485

Remove/install rocker arms

T05.30-0004-11

1 Screw

2 Rocker arm bearing bracket

3 Adjusting screws

 	Removing, installing
1	Remove cylinder head cover		AR01.20-T-5014B
2	Unscrew bolts (1) from rocker arm bearing bracket (2)	  Slacken the bolts evenly.  Installation: Tighten bolts (1) alternately so that the rocker arm bearing bracket (2) settles evenly.	*BA05.00-N-1001-01E
3	Take off rocker arm bearing bracket (2)	 Installation: Align rocker arm bearing bracket to valves and ensure that the adjusting bolts (3) are located in the recesses of the tappet rods.
4	Take out tappet rods	 Installation: Ensure the tappet rods are correctly seated in the tappets.
5	Install in the reverse order
6	Inspect valve clearance and set, if necessary
	Set valve clearance		AP05.30-T-0560B

 Engine timing - general

Number	Designation		Engine 402.970	Engine 441.980	Engine 446.938


BA05.00-N-1001-01E	Bolt of rocker arm bracket to cylinder head	Nm	65	75	75

Odkazované dokumenty