ar0510d8484c

Removing and installing slide rail in timing case cover

Typ ar · téma 05.10 · verze 0101 · 2000-02-15

Platí pro: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 05 Rozvod motoru › 05.10 Rozvod poháněný řetězem, rozvod poháněný řemenem — Řada 901 (modely 0**, 6**) · Řada 902 (modely 0**, 6**) · Řada 903 (modely 0**, 6**) · Řada 904 (modely 0**, 6**)

EinPAS 15 Motor › 15.17 Rozvod motoru › 15.17.34 Řetězový pohon/ozubený řemen/ozubený pohon — Řada 901 (modely 0**, 6**) · Řada 902 (modely 0**, 6**) · Řada 903 (modely 0**, 6**) · Řada 904 (modely 0**, 6**)

Platí také pro motory/převodovky: 111 979, 111 984

AR05.10-D-8484C

Removing and installing slide rail in timing case cover

14.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Removing and installing slide rail in timing case cover

D05.10-1003-06

1 Timing case cover

2 Slide rail

3 Bearing pin

Removing, installing

1

Remove timing case cover (1)

Do not damage oil pan gasket, take off timing case cover (1) carefully, replace oil pan gasket if necessary:

AR01.40-D-8000C

Remove oil pan.

AR01.45-D-7500C

2

Pull tensioning rail (2) off bearing pin (3)

The plastic guide of the tensioning rail (2) is clipped in place and can be replaced separately.

Running diagram of timing chain.

AR05.10-D-8127-01C

3

Install in the reverse order

The chain tensioner must be disassembled before being installed, moved into its basic position and then installed.

Odkazované dokumenty