W05.00-1030-09
1 Rocker arm shaft
2 Spring
3 Retaining ring
4 Rocker arm bracket (pulley side)
5 Rocker arm (intake)
A Pulley side (122 mm)
B Flywheel side (110 mm)
6 Rocker arm (exhaust)
7 Washer
8 Rocker arm bracket (inside)
9 Rocker arm bracket (flywheel side)
10 Bolt
11 Clamping piece
| Disassemble | ||
1 | Remove rocker arm assembly | ||
2 | Remove circlips (3) | ||
3 | Take rocker arm brackets (4, 8, 9), rocker arms (5, 6), washers (7) and springs (2) off rocker arm shaft (1) | Check all parts of the rocker arm assembly for wear and replace worn parts if necessary. | |
Rocker arm bushing inside dia. when installed | |||
Rocker arm shaft diameter | |||
| Assemble | ||
4 | Install locking ring (3) on the pulley side (A) | ||
5 | Mount rocker arm brackets (4, 8, 9), rocker arms (5, 6), washers (7) and springs (2) onto rocker arm shaft (1) | Begin with the rocker arm bracket (4) on the pulley side (A). Observe sequence of the separate parts. Fix rocker arm brackets (4, 8, 9) in position with the bolts (10) and clamps (11). | |
6 | Mount locking ring (3) on the flywheel side (B) | ||
7 | Install rocker arm assembly |
Check values for valve timing