ar0330g8022ch
Check flywheel, rework if necessary
Typ ar · téma 03.30 · verze 0107 · 2018-11-28
Platí pro: Engine 457.9, 458.9 in model 000.001
Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.
Zařazení
Funkční skupina 1 Motor › 03 Pohonná jednotka › 03.30 Setrvačník, unašeč, tlumič kmitů, ozubený věnec startéru — Řada 000 (modely 001)
EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.41 Klikový hřídel/setrvačník/lamela spojky — Řada 000 (modely 001)
Platí také pro motory/převodovky: 457 9**, 458 9**
AR03.30-G-8022CH
| Check flywheel, rework if necessary
| 05.09.2018
|
Engine
| 457.9, 458.9 in model 000.001
|
1
| Flywheel
|
D
| Flywheel dia. for clutch mounting
|
E
| Flywheel minimum width between the friction surface and mounting flange
|
| Remove
|
|
|
1
| Remove flywheel (1).
|
| AR03.30-G-8002CH
|
| Check
|
|
|
2
| Clean flywheel (1).
|
|
|
3
| Check the coupling friction surface of the flywheel (1) for scorch marks, score marks, and cracks.
| In the event of scorch marks or score marks that are not easily visible, the flywheel (1) can be reworked.
|
|
|
|
| If clearly visible and perceptible score marks or cracks can be detected,
|
|
|
|
|
|
|
|
|
| replace flywheel (1).
|
|
4
| Measure minimum width of the flywheel between the coupling friction surface and the mounting flange (E) on the flywheel (1).
| Flywheel
| *BE03.30-N-1003-03J
|
|
|
| Flywheel dia.
| *BE03.30-N-1001-03J
|
|
|
| Clutch friction surface
| *BE03.30-N-1002-03J
|
|
|
| If the minimum width of the flywheel between the coupling friction surface and the mounting flange (E) is not reached,
|
|
|
|
|
|
|
|
|
| replace flywheel (1).
|
|
|
| Reworking
|
|
|
5
| Rework flywheel (1).
| After refacing, there must not be any shrink holes or chatter marks present on the clutch friction surface.
|
|
|
|
| Flywheel
| *BE03.30-N-1003-03J
|
|
|
| Flywheel dia.
| *BE03.30-N-1001-03J
|
|
|
| Clutch friction surface
| *BE03.30-N-1002-03J
|
| Install
|
|
|
6
| Install flywheel (1).
|
| AR03.30-G-8002CH
|
Check values for flywheel
|
Number
| Designation
|
|
|
| Engine 457.9, 458.9
|
BE03.30-N-1001-03J
| Flywheel dia.
| Outer (A)
|
| mm
| 486,600...487,400
|
|
|
| for mounting starter ring gear (B)
| Default
| mm
| 432,490...432,645
|
|
|
|
| Deviation 0.5
| mm
| 431,990...432,145
|
Check values for flywheel
|
Number
| Designation
|
|
| Engine 457.9, 458.9
|
BE03.30-N-1002-03J
| Clutch friction surface
| Peak-to-valley height (Rz)
| μm
| 16
|
|
|
| Flatness
| mm
| 0,03
|
Check values for flywheel
|
Number
| Designation
|
|
| Engine 457.9, 458.9
|
BE03.30-N-1003-03J
| Flywheel
| Overall width (F)
| mm
| 70
|
|
|
| Minimum width between friction surface and mounting flange for repairs (E)
| mm
| 60
|
Odkazované dokumenty
