W03.20-1163-12
Shown on vehicle with code (Z90) Vehicle, capable of fording up to 1195 mm
1 Radial shaft sealing (only on vehicles with code (Z90) vehicle, capable of fording up to 1195 mm or with code (Z69) vehicle, capable of fording up to (1500 mm)
2 Radial shaft sealing ring
3 Crankshaft
Modification notes
29.9.09 | Remove radial shaft sealing ring; altered. | Step 2.1 | |
Remove radial shaft sealing rings; altered. | Step 2.2 |
| Removing | ||
1 | Remove belt pulley/vibration damper | ||
2.1 | Remove radial shaft sealing ring (2) | Vehicles without code (Z90) vehicle, capable of fording up to 1195 mm or without code (Z69) vehicle, capable of fording up to 1500 mm | |
2.2 | Remove radial shaft sealing rings (1, 2) | Vehicles with code (Z90) vehicle, capable of fording up to 1195 mm or with code (Z69) vehicle, capable of fording up to 1500 mm | |
| Checking | ||
3 | Check flange on crankshaft (3) for galling of the radial shaft sealing rings (1, 2) | Replace crankshaft (3) if necessary. | |
| Install | ||
4.1 | Install new radial shaft sealing ring (2) | Vehicles without code (Z90) vehicle, capable of fording up to 1195 mm or without code (Z69) vehicle, capable of fording up to 1500 mm | |
| |||
4.2 | Install new radial shaft sealing rings (1, 2) | Vehicles with code (Z90) vehicle, capable of fording up to 1195 mm or with code (Z69) vehicle, capable of fording up to 1500 mm | |
| |||
Lightly grease sealing lip of radial shaft sealing ring (1). | |||
5 | Install belt pulley/vibration damper | ||
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
6 | Start the engine and run it at varying speeds | ||
7 | Stop engine and check for leaks in the area of the radial shaft sealing ring (1) or the radial shaft sealing ring (2) for leaktightness | Visual inspection. |
Assembly tool
904 589 04 15 00
Repair materials
Number | Designation | Order number |
BR00.45-Z-1062-06A | Lubricating grease, Olista Longtime, DB supply specification 6804.60 | A 001 989 36 51 10 |
Odkazované dokumenty
- ar0320w300001r
- ar0320w300001ra Montáž předního radiálního těsnicího kroužku klikového hřídele
- ar0320w300002r
- ar0320w300002ra Demontáž předního radiálního těsnění u klikového hřídele.
- ar0320w4351r
- ar0330w1600r
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru