ar0320p3000mcd

Replace front crankshaft radial sealing ring

Typ ar · téma 03.20 · verze 0101 · 2007-09-10

Platí pro: ENGINE 660.9 in MODEL 451.3 /4

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 03 Pohonná jednotka › 03.20 Klikový hřídel — Řada 451 (modely 3**, 4**) · Řada 660 (modely 9**)

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.41 Klikový hřídel/setrvačník/lamela spojky — Řada 451 (modely 3**, 4**) · Řada 660 (modely 9**)

AR03.20-P-3000MCD

Replace front crankshaft radial sealing ring

21.8.07

ENGINE 660.9 in MODEL 451.3 /4

Replace front crankshaft radial sealing ring

P03.20-2280-11

1 Crankshaft radial seal

2 Timing case cover

Removing

1

Remove belt pulley for crankshaft

AR03.30-P-1700MCD

2

Lever crankshaft radial sealant ring (1) out of timing case cover (2) using a suitable tool

Ensure that timing case cover (2) is not damage otherwise it must be replaced.

Install

3

Clean sealing surface on timing case cover (2)

The sealing surface on the timing case cover (2) must be absolutely dust and grease-free otherwise leaks can occur.

4

Insert crankshaft radial sealing ring (1) in the timing case cover (2) and then install flush with the timing case cover (2)

The crankshaft radial sealing ring (1) must be installed dry.

5

Install crankshaft belt pulley

AR03.30-P-1700MCD

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Carry out engine test run and check engine for leaks in area of crankshaft radial sealing ring (1)

Odkazované dokumenty