Remove/install piston rings

Typ ar · téma 03.10 · verze 0102 · 2001-11-06

Platí pro: ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6 ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6 ENGINE 611.983 in MODEL 690.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AR03.10-D-7311B

16.4.99

ENGINE 611.981 /987 in MODEL 901.6, 902.6, 903.6, 904.6

ENGINE 612.981 in MODEL 902.6, 903.6, 904.6, 905.6

ENGINE 611.983 in MODEL 690.6

P03.10-0249-12

1 Plain compression ring

2 Taper-faced compression ring

3 Oil scraper ring

4 Coil spring

5 Pistons

6  Pliers

Fig. item, etc.	Work instructions
5	Pistons	remove	AR03.10-D-7021D
1, 2, 3	Piston rings	 Use pliers (6) for removing  Installation: Measure width of piston rings. Install piston rings with identical ring width. Pay attention to installation position, "Top" or color coding pointing toward piston crown. Install piston rings with joints offset 120°.	*000589513700
4	Coil spring	Insert in oil scraper ring (3) offset 180° to joint.

Pliers

000 589 51 37 00