Remove/install end cover

AR01.40-P-8913L

Remove/install end cover

22.9.10

 

Remove/install

1

Remove automatic transmission

AR27.10-P-0500I

2

Detach flywheel/drive plate

AR03.30-P-8001C

3

Remove the end cover (1)

 Pry off end cover (1) carefully at both points (magnifying lens) with a slanted screwdriver.

The crankshaft radial sealing ring (2) must always be replaced when the end cover (1) is removed.

Observe fitted sleeves (magnifying lens) when pressing on end cover (1)!

 End cover (1) is made out of magnesium alloy.

 Installation: Observe application of sealing compound to end cover (1):



Information on application of sealant to end cover of crankcase

AH01.40-P-1000-04A



*001589760900



*112589002500



*BA01.40-P-1004-01C

 Make sure that no sealant enters the oil ducts, otherwise this can lead to engine damage.

Loctite 5970 sealant

*BR00.45-Z-1013-01A

4

Replace front crankshaft radial seal (2)

The rear crankshaft radial sealing ring (2) must only be removed once the end cover (1) has been removed.

AR03.20-P-3063L

 Installation: Circumference and lip of crankshaft radial sealing ring (2) as well as counter tread on the crankshaft must be free of oil and grease.

5

Install in the reverse order

 Before installing transmission, inspect for oil leaks!

Number

Designation

Engine
137

BA01.40-P-1004-01C

End cover screw

Thread not pre-tapped

Nm

-

Thread pre-tapped

Nm

8

Number

Designation

Order number

BR00.45-Z-1013-01A

Loctite 5970 sealant

A 003 989 98 20