ar0120w5014b

Remove/install cylinder head cover

Typ ar · téma 01.20 · verze 0504 · 2015-09-24

Platí pro: Engine 541.9 in model 950, 952, 953, 954 Engine 542.9 in model 950, 952, 954

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 01 Motor kompletní, odvětrání motoru, hlava válců, kliková skříň › 01.20 Odvětrání motoru, víko ventilů — Řada 950 · Řada 952 · Řada 953 · Řada 954

EinPAS 15 Motor › 15.16 Hlava válců › 15.16.30 Víko hlavy válců — Řada 950 · Řada 952 · Řada 953 · Řada 954

Platí také pro motory/převodovky: 541 9**, 542 9**

AR01.20-W-5014B

Remove/install cylinder head cover

09.09.2015

Engine

541.9 in model 950, 952, 953, 954

Engine

542.9 in model 950, 952, 954

Remove/install cylinder head cover

1

Screw/bolt

2

Sealing ring

3

Cylinder head cover

4

Seal

W01.20-0003-12

Remove

Danger !

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

1

Tilt cab

Notes on tilting the cab

AH60.80-N-0003-01A

2

Remove cylinder head cover (3)

Installation: Clean sealing surfaces free of dirt and paint residues. Remove paint residues at the cylinder head side contact surface in the contact surface.
For cylinder head covers made out of light alloy, replace sealing rings (2) and seal (4).
For cylinder head covers made out of plastic, check the seal (4) for damage.

Engine 541.9, 542.9Bolt, cylinder head cover to cylinder head

*BA01.20-N-1001-01C

3

Install in the reverse order

Crankcase ventilation, cylinder head cover

Number

Designation

ENGINE 541.9, 542.9

BA01.20-N-1001-01C

Bolt, cylinder head cover to cylinder head

Nm

20

Odkazované dokumenty