ar0120p5014ff

Remove/install cylinder head cover

Typ ar · téma 01.20 · verze 0102 · 2005-05-12

Platí pro: ENGINE 134.9, 135.9 in MODEL 454.0

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 01 Motor kompletní, odvětrání motoru, hlava válců, kliková skříň › 01.20 Odvětrání motoru, víko ventilů — Řada 454 (modely 0**)

EinPAS 15 Motor › 15.16 Hlava válců › 15.16.30 Víko hlavy válců — Řada 454 (modely 0**)

Platí také pro motory/převodovky: 134 9**, 135 9**

AR01.20-P-5014FF

Remove/install cylinder head cover

10.12.03

ENGINE 134.9, 135.9 in MODEL 454.0

Remove/install cylinder head cover

P01.20-2080-06

Shown on engine 135.9

1 Cylinder head cover

2 Wiring harness

3 Tubing

4 Bolt

5 Tubing

 	Remove/Install
1	Remove ignition coils		AR15.12-P-2003FF
2	Detach wiring harness (2) from cylinder head cover (1)
3	Remove hoses (3, 5) from the cylinder head cover (1)
4	Remove bolts (4)	 The cylinder head cover (1) is secured with 10 bolts (4).
		 Installation: Pay attention to tightening diagram of cylinder head cover (1).	AR01.20-P-5014-03FF
			*BA01.20-P-1001-01K
5	Remove cylinder head cover (1)	 Inspect condition of rubber profile gasket of cylinder head cover (1), replace if necessary.
		 Installation: Clean the sealing surfaces.
6	Install in the reverse order

 Cylinder head cover

Number	Designation			Engine 134.910	Engine 134.911


BA01.20-P-1001-01K	Bolt of cylinder head cover to cylinder head		Nm	8	8

 Cylinder head cover

Number	Designation			Engine 135.930	Engine 135.950


BA01.20-P-1001-01K	Bolt of cylinder head cover to cylinder head		Nm	8	8

Odkazované dokumenty