ar0120b5014evi

Remove/install cylinder head cover

Typ ar · téma 01.20 · verze 0100 · 2018-04-25

Platí pro: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 01 Motor kompletní, odvětrání motoru, hlava válců, kliková skříň › 01.20 Odvětrání motoru, víko ventilů — Řada 382 (modely 155, 189) · Řada 936 (modely 9**)

EinPAS 15 Motor › 15.16 Hlava válců › 15.16.30 Víko hlavy válců — Řada 382 (modely 155, 189) · Řada 936 (modely 9**)

AR01.20-B-5014EVI

Remove/install cylinder head cover

09.04.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Remove/install cylinder head cover

1

Cylinder head cover

2

Oil filler neck hose

B01.20-0021-06

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-N-5000-01H

Remove

1

Remove the oil filler neck hose (2) on cylinder head cover (1)

2

Check the cylinder head cover profiled gasket (1) for leak-tightness

3

Remove the cylinder head cover (1)

Clean

4

Clean the cylinder head cover (1) and the rocker arm framework, in its full length and its sealing surfaces

Install

5

Install a new profiled gasket on cylinder head cover (1)

6

Install the cylinder head cover (1)

Tightening sequence of engine cylinder head cover

AR01.20-B-5014-03EVI

Observe the tightening diagram of the bolts.

Head cover bolt

*BA01.20-B-1001-01EVI

7

Perform the engine operation test

8

Stop the engine an check the area of the cylinder head cover (1) for leak-tightness

Visual inspection

Engine vent. cylinder head cover

Number

Designation

ENGINE 936.9

BA01.20-B-1001-01EVI

Head cover bolt

M8 x 1.5

Nm

25

Odkazované dokumenty