AR01.10-T-2400-02C | Detach, attach hose and cable connections | ||
Danger! | Risk of injury to skin and eyes suffering scalding from contact with hot coolant spray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage bottles. Wear protective gloves, protective clothing and eye protection. | |
Danger! | Risk of explosion from fuel igniting, risk of poisoning from inhaling and swallowing fuel as well as risk of injury to eyes and skin from contact with fuel. | No fire, sparks, naked flames or smoking. Wear protective clothing when handling fuel. |
T01.10-0009-06
Detach
1 Remove water hoses between
- engine and radiator,
- coolant circulation pump and radiator,
- engine and stationary heater
(arrows).
2 Remove coolant pipe (1).
After removing the connected hoses, the pipe can be removed.
3 Remove fuel lines (2) between engine and body.
4 Remove fuel feed line on the feed pump.
5 Remove air suction hoses on generator and hang to one side.
T09.41-0008-01
6 Remove air suction system between
- air cleaner and turbocharger suction inlet,
- charge air cooler outlet and intake duct,
- turbocharger outlet and charge air cooler
(arrows).
T09.40-0008-10
7 Remove suction line (3) of power steering pump.
8 Remove flexible steel compressed air line (4).
9 Remove compressed air line from exhaust brake cylinder.
Attach
10 Install hoses and lines in the reverse order.
Odkazované dokumenty
- as2000z000101a Nebezpečí poranění kůže a očí opařením vystřikující, horkou chladicí kapalinou. Nebezpečí otravy při požití chladicí kapaliny
- as4700z000101a Nebezpečí výbuchu při vznícení, nebezpečí otravy při vdechnutí a požití paliva inebezpečí úrazu v důsledku přímého doteku kůže a očí s palivem